Technical Presentations

Capacitor energization, power system conversion, and load flow studies in EMTP858

Abstract
The addition of capacitor banks to the system may result in the frequency shift of the resonance modes in the system. This change may result in undesired interaction of the system with other elements ... see moreduring the transients. In addition, the energization of the capacitor banks may result in undesired over voltage and high inrush current (above the breaker capability limits).

Following steps has been taken to ensure the addition of the new cap bank to the system will not adversely affect the performance of the system

• System conversion to EMTP from PSSE using import tool function in EMTP for 5 busses away from the system
• Running the load flow and benchmarking the results
• Running the frequency scan of the system
• Performing the transient studies for 100 breaker closing instances
• Perform the statistical analysis (available tool in EMTP)
• Perform the worst-case scenario achieved during the statistical analysis

Tag(s): capacitor switching, overvoltage, inrush current, PSS/E import tool, frequency scan, statistical analysis

Impact of Power Transformer Energization on Relay Protection Operation844

Abstract
One of the main causes of the incorrect operation of transformer relay protection are inrush currents. The transient inrush current occurs when energizing the unloaded transformer, and it is a consequ... see moreence of the transformer core saturation. This paper presents analysis of transients caused by energization of 300 MVA three-phase autotransformer with stabilizing winding and voltage ratios 400/115/10,47 kV.

Using the PAMSUITE Toolbox in EMTP, many simulations were performed to show the impact of model’s parameters on the amplitude and duration of inrush currents as well as the probability of 2nd harmonic differential current amplitude occurrence. Simulation results show that controlled switching reduces inrush currents amplitudes and increases 2nd harmonic content in differential currents. A Protection Toolbox in EMTP was used for modelling CT saturation and operation of transformer’s differential protection relay.

Based on the simulation results the optimal differential protection settings were determined, and the probability of false relay protection operation was calculated.

Tag(s): transformer, energization, inrush, differential, protection, harmonics, bctran, pamsuite

POWERGRID experience with EMTP793

Abstract
To meet the increasing power demand, a number of extra high voltage (EHV) transmission lines is being added to the power system network, which enhances the complexity of power system network. It is es... see moresential duty of power engineer to fulfill the growing demand ensuring the reliability, stability & security of GRID. Transient simulation tools like EMTP play a vital role to provide the flexibility to power engineer for simulating/studying the various case scenarios which couldn’t be simulate in physical power system.


Such tools eventually help power engineer to build a sustainable and secure GRID. In POWERGRID, being a central transmission utility, various studies are being carried out to arrive the technical particular of new transmission system and optimize or fine tuning of existing system. Some of them i.e. Transient Recovery Voltage (TRV) study of 1200kV Transmission network, Smart Power from insulated earth wire of EHV transmission line and 1200kV Transformer Inrush current study are discussed in presentation. 1200kV National Test Station was established & successfully charged along with the transmission line in state of BINA in India.


TRV study was carried out for assessment of various test duties of 1200kV Circuit Breaker. Presentation cover the detailed discussion of 1200kV TRV study and a brief about the facilities like HIL, HVDC control Replica setup, STATCOM replica setup available at Powergrid Advanced Research and Technology Centre (PARTeC).