Exchange Platform

Author: e.rutovic
Type: Example
Downloaded: 748 times
Date: 2013-02-20

EMTP-RV to Matlab

Description:
This script imports the EMTP-RV output data inside the Matlab Workspace.
The files with the extension ".mda" and ".m" must be placed inside the Matlab current ... see morefolder.
You should run "main.m" .

Tag(s): Matlab, Script

Author: gerinlajoie.luc
Type: Model
Downloaded: 464 times
Date: 2012-11-23

Extra control of machines - IEEE AVR

Description:
The proposed AVR sub-circuit models consist of a few IEEE 421 standard exciter[1] and Power Systems Stabilizer and governor. Don't forget to click the require observed signals in the SM devi... see morece, see Observe and Mechanical Tabs (vd, vq, if, Pmss, Efss, Omega_1, etc.) In this file, many duos and trios combinations of:
Exciter:
- IEEEX1 (dc1),
- IEEEX2,
- IEEEX4,
- IEEET5,
- EXST1,
- EXST1A,
Stabilizer:
- PSS1A,
- PSS2B,
- PSS4B,
- Q type II (var control)
Governor:
- IEEEG0,
- IEEEG1,
- IEEEG3,
- DEGOV1
- GAST,
- TGOV1,
- TGOV5[1]
IEEE Std 421.5, Recommended Practice for Excitation System Models For Power System Stability Studies, 2005

Tag(s): Components

Author: AdminEMTP-RV
Type: Model
Downloaded: 334 times
Date: 2012-06-18

Line_Coupling

Description:
The following example demonstrates the coupling effect between 3 adjacent transmission lines.

The case study consists of the implementation of a third transmission line next to two existing... see more lines. The data of the geometrical configuration are entered in the DATA LINE module and are stored in the "line_couplin_CP.lin". The generated model was obtained using the CP option and are loaded to the CP m-phase module using the data included in the "line_coupling_CP_rv.csv" file. The results are very close to the measurements provided in "H.W. DOMMEL ET AL, CASE STUDIES FOR ELECTROMAGNETIC TRANSIENTS, P.1,1991".

Tag(s):

Author: AdminEMTP-RV
Type: Model
Downloaded: 149 times
Date: 2012-06-18

Protection_Homopolaire_Evol

Description:
This case introduces a typical zero sequence relay tested in a MV network.

This is a contribution of Marc Petit from Supelec in France.

See the comments in the file.

Tag(s): Protection, Components

Author: AdminEMTP-RV
Type: Model
Downloaded: 134 times
Date: 2012-06-18

Sic_Test

Description:
Example of a 276 kV Sic arrester.

This is a contribution of Bob Wilson from WAPA in the USA.
This file can only be read by V 2.0.1 or higher.

This design introduces a test c... see moreircuit to evaluate different discharge voltages and the 60 Hz follow current of the Sic arrester.

Tag(s):