Exchange Platform

Author: AdminEMTP-RV
Type: Model
Downloaded: 301 times
Date: 2012-06-18

Comp_bctran_3Wind

Description:
A good case of comparison between BCTRAN and the regular encapsulated model available in the transformers library during transient state.

Tag(s): Transformers

Author: AdminEMTP-RV
Type:
Downloaded: 458 times
Date: 2012-06-18

Cross_Bonded_Cable

Description:
Insulation coordination - 225 kV cross bonded cable - protection of the sheath.
In the configuration a 225 kV cross-bonded cable is connected at both ends to an otherhead line. The sheath is prot... see moreected by star-connected arresters.
The modelling used is adapted for the study of Fast-Front-Overvoltages (see IEC 60071)
A current source, with a CIGRE concave shape (See CIGRE 63 document), representing a lightning stroke has been connected to a tower close to the cable.
The case includes the modelling of the different elements of the configuration (cable, spans, arresters...).

Tag(s):

Author: AdminEMTP-RV
Type: Model
Downloaded: 397 times
Date: 2012-06-18

CB_arc_CM

Description:
This is an interesting case of the study of arc-circuit interaction in case of the interruption of a short-line fault.The arc is represented by a composite Cassie-Mayr model and the line is represente... see mored as frequency-dependant.
The case shows the application of black-box arc modeling in the study of kilometric-line fault capability of a 420 kV circuit-breaker. By zooming on the arc current and voltage near current-zero, post-arc current and initial TRV may be visualized in both cases of clearing and thermal failure.

Tag(s): Example, Protection

Author: AdminEMTP-RV
Type: Model
Downloaded: 204 times
Date: 2012-06-18

3-phase_Statcom_Prel_Version

Description:
This is a three-phase three level Statcom model with PWM controller for use in transmission and distribution systems. It works quite well under severe perturbation.
The official version of this s... see moretatcom will be available in version 1.1 to be release in mid-june 2004.

Tag(s):

Author: AdminEMTP-RV
Type: Document
Downloaded: 527 times
Date: 2012-06-18

A Tool for Steady-State and Dynamic Analysis of PV Generation in Low Voltage Grids

Description:
Authors:
Dennetière S., Mahseredjian J., Duvauchelle C., Tounsi B.
This paper describes a tool based on EMTP-RV that simulates the steady-state and the dynamic behavior of photovoltaic (PV)... see more units on a low voltage grid. The tool takes into account load and irradiance curves to evaluate the impact of PV units on the voltage profile along the grid as well as the dynamic behavior of PV inverters. This tool has already been used to analyze and explain undesired disconnections of PV units in an existing system.

Tag(s):