Access to EMTP user presentations, webinars, and slide deck presentations.
page 10 of 30
150 presentations for EMTP:
Author(s): Theofilos Papadopoulos
Type:Technical Presentation
Date: 2021-09-03
Simulation of Inductive EM Interference Caused by an HVDC Underground Cable Link on a Railway System
Abstract
Scope of the presentation is to present results regarding inductive electromagnetic interference (EMI) between a real HVDC link and the nearby communication cables of a railway system under pole-to-gr... see more
Tag(s): emi, wb cable, hvdc, interference
Author(s): Bikrant Poudel
Type:Technical Presentation
Date: 2021-09-02
Optimization of Control Parameters of Grid-Connected PV System in EMTP
Abstract
It is observed that the controller gain parameters of the PV model have a significant impact on the PV plant’s response during the fault recovery and the PV plant’s interaction with the rest of th... see more
Tag(s): pv plant, ibr, pso, optimization, scripting, pll, inverter control, inverter based resources, DER
Author(s): Chandra Pallem
Type:Technical Presentation
Date: 2021-09-02
Dynamic Overvoltage Conditions Experienced at a PV Solar Power Plant
Abstract
We present the results from an investigation of the cause of dynamic overvoltage conditions experienced at a solar power plant, that resulted from energizing the PV solar plant 34.5 kV collection syst... see more
Tag(s): pv park, tov, diesel generator, temporary overvoltage
Author(s): Aboutaleb Haddadi
Type:Technical Presentation
Date: 2021-09-02
Ground Fault Overvoltage with Inverter-Based Distributed Energy Resources
Abstract
A Ground Fault Overvoltage (GFO) can occur in situations where an ungrounded transmission line and associated ungrounded transmission equipment is energized from distribution connected Distributed En... see more
Tag(s): gfov, tov, ibr, DER, inverter, islanding, load rejection, inverter based resources
Author(s): Ivo Uglesic
Type:Technical Presentation
Date: 2021-09-02
Measurement and EMTP Simulation of Ferroresonance Phenomenon
Abstract
Ferroresonance is difficult to predict because its occurrence in the power system depends on several parameters, some of which are unknown (parasitic capacities). In addition, measuring electrical con... see more
Tag(s): ferroresonance, tov, saturation
![[R&D]_EMTP : Recherche et développement](https://www.emtp.com/system/files/imagecache/presentation/slide1_1.jpg "[R&D]_EMTP : Recherche et développement")
![[Protection_Devices]_Étude des courants coupés par les sectionneurs de changemen](https://www.emtp.com/system/files/imagecache/presentation/TechnicalPresentation1.jpg "[Protection_Devices]_Étude des courants coupés par les sectionneurs de changemen")