Access to EMTP user presentations, webinars, and slide deck presentations.
page 4 of 34
167 presentations for :

Author(s): Theofilos Papadopoulos, Andreas Chrysochos
Type:Technical Presentation
Downloaded: 0
Date: 2023-04-01
Modelling Aspects of Sheath Bonding in Underground Power Cable Systems Using EMTP®
Abstract
The accurate modelling of underground cable systems and specifically of sheath bonding designs in system studies is very important. In this presentation different modelling issues regarding the calcul... see more
Tag(s): Underground Cable Systems, Sheath Bonding, Modeling, Power Frequency, EMTP Simulation

Author(s): Dileep Kumar
Type:Technical Presentation
Downloaded: 0
Date: 2023-04-01
Overvoltage Occurrence Due to Ferroresonance Phenomena During The EHV Cable Feeder Charging
Abstract
EHV cables have higher capacitance and a larger current, which increases the possibility of overvoltage occurrences during the charging. A 400kV EHV cable experienced a long-duration overvoltage incid... see more
Tag(s): EHV Cables, Overvoltage, Ferroresonance, Lightning Arrestor, EMTP Simulation

Author(s): Domagoj Hart
Type:Technical Presentation
Downloaded: 0
Date: 2023-04-01
Implications of faults on insulation coordination of dedicated metallic return on bipolar HVDC overhead transmission lines
Abstract
This presentation will focus on a specific issue of bipolar HVDC lines with a dedicated metallic return (DMR). DMR is insulated to a lower level than the pole and its insulators are shorter. One event... see more
Tag(s): HVDC, Insulation Coordination, Faults

Author(s): Dr. S. V Anbuselvi
Type:Technical Presentation
Downloaded: 0
Date: 2023-04-01
Coordinated Control of EV Charging Stations for Grid Frequency Support Using Dual Droop Control Strategy Employed For VSC & DAB Converters
Abstract
Battery technology and power electronic converters have facilitated the widespread use of Electric Vehicles (EVs), resulting in reduced rotational inertia and frequency stability of the power system. ... see more
Tag(s): Power Electronic Converters, Frequency Stability Issues, EMTP® Simulations

Author(s): Cesar Colignon, Daniel Peralta
Type:Technical Presentation
Downloaded: 0
Date: 2023-04-01
Development of Standard Models for IBR in EMT Simulations
Abstract
In this work, the standard model for wind power generation systems based on the international standard IEC 61400-27-1 (Edition 2.0, 2020) was implemented in EMTP®. Its validation has been carried out... see more
Tag(s): IBR, Renewable, Wind Power