Access to EMTP user presentations, webinars, and slide deck presentations.
page 1 of 4
17 presentations for parameters:

Author(s): Melih Guneri
Type:Technical Presentation
Downloaded: 0
Date: 2024-07-29
FFOV Analysis for 500 kV Substation
Abstract
This is a presentation on lightning overvoltage analyses for a 500/220 kV substation. Highlights: An interesting application case where the electrical distance between the surge arrester and transform... see more

Author(s): Xavier-Marie Viel
Type:Technical Presentation
Downloaded: 0
Date: 2023-04-01
Onshore windfarm generic models and sensitivity analysis methods for harmonic studies
Abstract
To facilitate the integration of renewable energy, RTE must connect new substations where multiple onshore wind power plants are connected at a distribution voltage level. These substations can be con... see more
Tag(s): Renewable, Harmonic Analysis Studies, Sensitivity Analysis, Wind Power Plants

Author(s): Levente Czumbil
Type:Technical Presentation
Downloaded: 0
Date: 2023-04-01
Evaluation of Electromagnetic Interferences Affecting Metallic Pipelines
Abstract
This chapter presents some analysis of the modeling techniques used to evaluate the effects of electromagnetic interference phenomena that could occur when metallic pipelines are placed close to high-... see more
Tag(s): Electromagnetic Interference, Metallic Pipelines, Electric Fields, Magnetic Fields, Induced Voltages

Author(s): Jegadeesh Kumar
Type:Technical Presentation
Downloaded: 12
Date: 2022-09-01
Insulation coordination study of 220 kV transmission line for reliability improvement against lightning-induced overvoltages
Abstract
This presentation shows a detailed insulation coordination verification using EMTP. It includes an accurate representation of transmission line components considering actual site data such as conducto... see more
Tag(s): Insulation Coordination, Lightning Strike, LIOV, Line Surge Arresters, Back-Flashover

Author(s): Frédéric Colas
Type:Technical Presentation
Date: 2021-09-05
From FEMM to EMTP Cable Data – How to Use FEMM to Compute the Power Cable Parameters
Abstract
In the context of the simulation of an electrical network, different models of lines / cables are available. Among these, we can cite the PI models, the frequency dependent models (FD-Line) or the mod... see more
Tag(s): fem, cable, parameters