Access to EMTP user presentations, webinars, and slide deck presentations.
page 1 of 1
3 presentations for emi:
Induced Voltage Study843
Abstract
MidAmerican Energy has conducted studies at some locations on our system to identify voltages that are induced due to lines on the same structures. For example, MidAmerican added a new 161 kV line fro... see morem substation D to substation E (not shown) through substation C. The line is mostly single circuit except between substations B and C where a second 161 kV line was added on the structures. There is also an existing 13.2 kV underbuilt distribution circuit on the structures between substations A to C.
The induced voltage study was performed to get an understanding on the level of voltages that may be expected when the 161 kV line from substation A to substation C is out of service, but the 161 kV line from substation D to substation C is in service and vice versa. The analysis provided very useful information on the level of induced voltages that may be expected on the 13 kV distribution feeder and helped MidAmerican to develop mitigation measures.
Tag(s): line, induced voltage, EMI
Simulation of Inductive EM Interference Caused by an HVDC Underground Cable Link on a Railway System853
Abstract
Scope of the presentation is to present results regarding inductive electromagnetic interference (EMI) between a real HVDC link and the nearby communication cables of a railway system under pole-to-gr... see moreound fault conditions.
?he HVDC and the railway system route in parallel at a part of the onshore section of the HVDC link. The inductive EMI on the communication cable arises from magnetic field variation of the high-frequency components contained in the transient response of the fault current, excited by the HVDC link.
Consequently, it is expected that no inductive EMI will occur by the DC current in the case of the HVDC system normal operation (steady-state) either in bipolar or monopolar (current return though the electrode) mode. The induced transient voltages and currents are calculated using the Electromagnetic Transients Program (EMTP).
Tag(s): emi, wb cable, hvdc, interference
Author(s): L. Czumbil - Technical University of Cluj-Napoca
Type:Technical Presentation
Date: 2021-06-16
Induced Currents and Voltages in Underground Metallic Pipelines due to nearby Power Lines782
Abstract
During the last decades, environmental and economic reasons impose that gas or water pipelines share the same distribution paths with high voltage or medium voltage power lines, to restrain the financ... see moreial and the ecological costs. Therefore, the cases where underground metallic pipelines and power lines share proximal rights-of way for considerable lengths are a common practice.
The electromagnetic interference of power lines upon the metallic buried pipelines is an issue of priority, to avoid the development of induced voltages that could jeopardize the safety of the personnel and the integrity of the pipelines structure. Indeed, the developed voltages and currents can be dangerous for people who touch metallic structures connected with the pipelines or just stand nearby.
Moreover, the induced voltages can result in the corrosion of a pipeline due to electrochemical effect, leading to repair or/and replacement costs and environmental repercussions.
It is worth mentioning that the interference comprises an inductive, a conductive and a capacitive part. The capacitive part can be safely ignored in the case of buried pipelines, since the conductive component is considered only under fault conditions and affects the part of the pipeline near the faulted structure.
The inductive component is present both during faults and normal operating conditions and is the dominant one. Due to the inductive interference, voltages and currents are induced in a buried metallic pipeline.