Access to EMTP user presentations, webinars, and slide deck presentations.
page 1 of 9
41 presentations for analysis:
Author(s): Jegadeesh Kumar
Type:Technical Presentation
Date: 2024-07-29
Application of single phase tripping and re-closing to 380KV double circuit transmission line
Abstract
Faults within a transmission system can greatly impact the capability for power transfer. Isolating a fault by removing the line from service can further diminish the power transfer capacity, compromi... see more
Tag(s): Fault Analysis, Transmission System, Secondary Arc Current, Circuit Breaker
Author(s): Lorena Otalora Garcia, Samantha Munoz
Type:Technical Presentation
Downloaded: 0
Date: 2024-07-29
Dynamic EMT Models Homologation - Usage and Projection
Abstract
Since 2022, the National Electric Coordinator in Chile has requested standardization of the dynamic models of the power plants or parks connected to the National Electrical System (SEN). As a company ... see more
Tag(s): Wind Power Photovoltaic Systems, EMT Homologations, Chilean National Electrical System
Author(s): Marlon Lujan
Type:Technical Presentation
Downloaded: 0
Date: 2024-07-29
Implementation of an Opening Resistor to Mitigate TRV in a Hydroelectric Project in the Peruvian Electrical System
Abstract
In this hydroelectric generation project, connection is established in a 500 kV system, which includes series compensation. A comprehensive TRV analysis was conducted to evaluate the existing circuit ... see more
Tag(s): Hydroelectric Generation, Series Compensation, Circuit Breakers, TRV Analysis
Author(s): Melih Guneri
Type:Technical Presentation
Downloaded: 0
Date: 2024-07-29
FFOV Analysis for 500 kV Substation
Abstract
This is a presentation on lightning overvoltage analyses for a 500/220 kV substation. Highlights: An interesting application case where the electrical distance between the surge arrester and transform... see more
Author(s): Maicon Jaderson Silveira Ramos
Type:Technical Presentation
Downloaded: 0
Date: 2024-07-26
Performing Acceptance Tests of a Wind Farm Power Plant Using the EMTP® Tool.
Abstract
This presentation shows the acceptance tests performed on a wind power plant modeled using the WECC model. The plant cosistes of 121 turbines, each with a capacity of 0.85 MW, operating at 60 Hz. Thes... see more
Tag(s): Wind Power, Power System Simulation, PSS®E, Model Validation
![[R&D]_EMTP : Recherche et développement](https://www.emtp.com/system/files/imagecache/presentation/slide1_1.jpg "[R&D]_EMTP : Recherche et développement")
![[Protection_Devices]_Étude des courants coupés par les sectionneurs de changemen](https://www.emtp.com/system/files/imagecache/presentation/TechnicalPresentation1.jpg "[Protection_Devices]_Étude des courants coupés par les sectionneurs de changemen")
