122 Results for the search " ":
Pseudo Aleatory Volt/Ampere source
Description:
Pseudo Aleatory Volt/Ampere source single and three phases devices. Build with Base Line Wander generator. Useful for Spectrum Analysis
nota bene: ts must be a multiple of dt.
Tag(s): Source
Random control generators
Description:
Four control sources are included:
Baseline Wander
Normal distribution
Uniform distribution
Lorenz Chaos
Tag(s): Components
Javascript in EMTP: The basics (Part 1)
Description:
A basic javascript tutorial for EMTP is presented. A useful self-explanatory case study along with a series of code snippets are presented for better understanding and controlling over EMTP by the Ele... see morectrical engineers. Ask me if you have any queries and suggestions at manzur_bd@yahoo.com
Tag(s): Example
Ferro_hyst_Zno
Description:
Simple ferroresonance case. In this case the switching of a part of the network comprised of a cable connected to a no-load transformer is carried out. A pole of the breaker fails to open and an impor... see moretant and stable ferroresonance phenomena appears.
The ferroresonance problem, whether in a general circuit or in a power-system circuit, is usually tackled in one of two ways : circuit configuration (i.e series and/or parallel) or nonlinearities (i.e saturation and hysteresis of transformers). A fundamental factor to the occurence of ferroresonance is the nonlinear magnetizing characteristic of the transformer and the capacitive coupling.
In this case a 250 kVA, 20/0.4 kV transformer is used. This transformer is represented by the hysteresis transformer model. The hysteresis element has been used as the magnetization branch of the one-phase transformer model. A 200 m cable is used for the study. This cable is modelled by a PI-section. The short circuit power of the source is about 150 MVA.
In order to reduce overvoltages caused by ferroresonance, surge arresters are installed. Two questions have emerged : will the arresters mitigate ferroresonance, and will they fail during ferroresonance ? Simulations in different transient regimes can be carried out in order to determine the maximal current, overvoltages (voltage at the end of the cable for instance), energy absorbed by the arresters
Tag(s): Protection